Thermocouples offer the user a rugged, robust method of measuring process temperature and offer extremely good reliability. Suitable for applications operating in the range -200 to +1700°C depending on the construction specified. We can assemble sensors suitable for use in most applications and we can advise you of any limitations.

Below you will find a series of data sheets for the more standard assemblies that we manufacture but our capabilities are by no means limited to these. If you have a special requirement we can invariably help so please do not hesitate to contact us. Click here to see some examples of the special assemblies we have made to order.

In addition we can supply a complete range of accessories to assist you in the installation and use of your sensor. Click here for further information on our products which include compression fittings, pockets, extension cable and connectors.

• Types K, J, T, N, R and S
• Simplex, Duplex or Triplex sensors
• Grounded, Insulated or Exposed Junctions
• Wide range of sheath diameters
• Sheath length as required
• Choice of tip style - rounded, pointed or ventilated
• Welded process connections
• Hygienic sanitary connections
• Wide range of cables and terminal  heads
• In head temperature transmitters

PPL1-T Thermocouple with Flying Lead

A general purpose sensor with a choice of cable terminations. Ideal for use with compression fittings or our PPL50-TW pocket.

PPL1-T Data Sheet

PPL2-T Thermocouple with Flying Lead and Process Connection

As our flying lead sensor but the addition of a welded process connection on the sheath making installation simpler.

PPL2-T Data Sheet

PPL3-T Data Sheet

PPL4-T Thermocouple with Process Connection and Terminal Head

As our PPL3 sensor but with a welded process connection thread directly below the terminal head.

PPL4-T Data Sheet

PPL5-T Thermocouple with Process Connection and Lagging Extension to Terminal Head.

A development of the PPL4 sensor, this time incorporating a lagging extension. This allows the terminal head to sit above any insulation or to reduce the ambient temperature of the head to protect any electronics included.

PPL5-T Data Sheet

PPL6-T Thermocouple with Tri-Clamp Hygienic Connection

This sensor incorporates an industry standard Tri-Clamp flange connection. Along with crevice free welds this sensor is suitable for use in many sanitary applications.

PPL6-T Data Sheet

PPL7-T Thermocouple with RJT Hygienic Connection

This sensor incorporates an industry standard RJT connection. Along with crevice free welds this sensor is suitable for use in many sanitary applications.

PPL7-T Data Sheet

PPL8-T Thermocouple with Pocket and Spring Loaded Insert

Our PPL8 sensor allows the user to easily remove the sensor at a later date without breaking into the process line.

PPL8-T Data Sheet

Our PPL9 sensor is ideal for measuring air temperature indoors or where there is no risk of condensation.

PPL9-T Data Sheet

PPL10-T Data Sheet

PPL13-T Mineral Insulated Thermocouple with Flying Lead.

Our PPL13 sensor is similar to our PPL1 sensor but its mineral insulated construction offers operating temperatures of up to  1250°C.

PPL13-T Data Sheet

PPL15-T Mineral Insulated Thermocouple with Terminal Head.

Our PPL15 sensor is similar to our PPL3 sensor but its mineral insulated construction offers operating temperatures of up to  1250°C.

PPL15-T Data Sheet