[tabs slidertype=”simple”] [tab]
[/tab] [tab]
[/tab] [/tabs]
Optris CX LT – Rugged Sensor for Industrial Applications
The CX sensor is ideal for applications which require a robust sensor that can take some abuse. The sensor is easy to use with a simple 2 wire, 4-20mA connection, and easily configurable using the optional USB interface and Compact Connect software.
Calibration as well as a full range of accessories are available for the Optris Compact infrared pyrometers.
[learn_more caption=”Features” state=”open”]
| Easy two wire installation |
| Wide measurement range of -30 °C to 900 °C |
| Optional USB programming interface and software |
| Wide power range: 5 – 30 V DC |
| Optical resolution of 22:1 |
| Simultaneous two wire output and digital communication |
| Alarm output (0 – 30 V / 500 mA) |
[/learn_more]
[learn_more caption=”General Specifications” state=”close”]
| Environmental rating: | IP 65 (NEMA-4) |
| Ambient temperature: | -20°C to 75°C |
| Storage temperature: | -40°C to 85°C |
| Relative humidity: | 10 – 95%, non condensing |
| Vibration: | IEC 68-2-6: 3 G, 11-200 Hz, any axis |
| Shock: | IEC 68-2-27: 50 G, 11 ms, any axis |
| Weight: | 350 g |
[/learn_more]
[learn_more caption=”Measurement Specifications” state=”close”]
| Temperature range: | -30 – 900°C (scalable via software) |
| Spectral range: | 8 – 14 μm |
| Optical resolution (90 % energy): |
22:1 |
| CF-lens (optional): | 0.6 mm @ 10 mm |
| System accuracy: | ±1% or ±1,4°C (1) |
| Repeatability: | ±0.5% or ±0.7°C (1) |
| Temperature resolution: | 0.1K |
| Response time (90%): | 150 ms |
| Emissivity/Gain : |
0.100 – 1.100 (adjustable via 0-10 V DC input or software) |
| Transmissivity : |
0.100 – 1.100 (adjustable via software) |
| Signal processing: | peak hold, valley hold, average; extended hold function with threshold and hysteresis |
| Software: | optris Compact Connect |
1) Whichever is greater
[/learn_more]
[learn_more caption=”Electrical Specifications” state=”close”]
| Output/analogue: | 4 – 20 mA |
| Output/alarm: | 0-30V/500mA (open collector) |
| Output/digital: | USB (optional) |
| Loop impedance: | max. 1000 1) |
| Cable length | 8m |
| Power supply: | 5-30 V DC |
(1) Independent of supply voltage.
[/learn_more]
[learn_more caption=”Optical Specifications” state=”close”]
[/learn_more]
[learn_more caption=”Dimensions” state=”close”]
[/learn_more]
[learn_more caption=”Accessories” state=”close”]
[/learn_more]
[learn_more caption=”CompactConnect Software” state=”close”]
[/learn_more]
