PPL2 temperature probe with fixed process connection thread

PPL2-T Thermocouple with Process Connection and Flying Lead

Our PPL2-T temperature sensor has a fixed process connection thread making installation easier than with a compression fitting design thus making it ideal in OEM applications where assembly time is critical. The sensor is suitable for the measurement of liquids and gases across a wide temperature range. All sensors are made to order so it is generally possible to meet all of your requirements.

The plain stem of the probe is made from 316 stainless steel and the tip and the fitting are TIG welded to give a pressure tight housing for the sensor and your application. Many metric and imperial probe diameters are available from 2mm upwards. Threads are generally BSP or NPT but we can supply others to your requirements such as Metric, UNF etc.

We stock a range of cables for use in our sensor manufacturing from low cost PVC to high performance PTFE (Teflon) and high temperature glass fibre insulations. We can cover almost any requirement whether this is low or high temperature or other environmental considerations such as moisture ingress protection or protection against corrosive substances.

Other optional extras include pointed tip probes for insertion into semi-solids such as food, reduced diameter sensing tips for improved response times and pre-bent probes to fit your application perfectly.

The PPL2-T is ideal for installation directly into your process or with our PPL51-TW pocket. The PPL2 is also available as a Resistance Thermometer sensor. We are also able to supply the probe with your choice of thermistor sensor.

We offer a comprehensive calibration service and a wide choice of accessories.

Please ask for more information.

Features

Sensor Probe with Flying Lead.
General Purpose Industrial and OEM Applications.
Ideal for use with Compression Fittings or Pockets.
Wide Choice of Wiring, Detectors, Sheath Sizes & Lead Types.
Manufacture to Your Requirements.
UKAS or Traceable Calibration Available.

General Specifications

Sensor Type: Type J, K or T thermocouple. Insulated or Grounded hot junction.
Operating Range : Generally limited to range of lead as standard – see below – but can be extended by request.
Sheath Material: 316 stainless steel
Tolerance Band: Type J, K or T thermocouple. Insulated or Grounded hot junction.
Wiring System: Simplex or Duplex
Lead Types: A—PVC/PVC Screened (-10 to +105°C) B—PTFE/PTFE Screened (-200 to +250°C) C—Glass Fibre Stainless Steel Overbraid (0 to 350°C) (Other cables available upon request).

Probe Drawing

PPL1 temperature probe drawing

Part Number System

PPL1-T part numbering