USB Server Gigabit simple cable extension for Optris Infrared Cameras & CT video /CS video

 The USB Server Gigabit provides long distance control of infrared cameras. Acting as a USB to Ethernet adapter, it bridges distances greater than 20 meters between the PC and the Optris PI thermal imaging camera as well as Optris CTvideo / CSvideo pyrometers.

 

Important parameters of USB Server Gigabit

  • Dimensions: 105 x 75 x 22 mm
  • Weight: 200 g
  • Network: 10/100/1000 BaseT autosensing (max. 1000 Mbit/s)
  • Power supply: Power-over-Ethernet (PoE) Class 3 (6.49-12.95W) or via screw terminal DC 24 V…48 V (+/-10 %)
  • Current consumption: Ext. supply (24V DC) without USB devices: typ. 120 mA Ext. supply (24V DC) with 2 USB devices each 2.5W: typ. 420 mA

 

 

Features

 Fully USB 2.0 compatible, data rates: 1.5 / 12 / 480 mbps, USB transfer modes: Control, Bulk, Interrupt, Isochronous
 Full TCP/IP support incl. routing and DNS
Two independent USB ports
 Galvanic isolation 500 VRMS (network connection)
 Remotely configurable via Web Based Management
 Supply from PoE or external power supply

Technical Data

Connection options

On a direct connection to a PC both, the USB server as well as the PC must use a fixed IP address. There is no DHCP server available. Accomplish the following settings on your PC once (depending on the operating system the procedure can differ from the here shown – the following description refers to a Windows 7 system).