Optris CT P7 sensing head

Single point_interfaces resized 2

 

NEW Optris CT P3 Miniature Infrared Pyrometer

With a spectral range of 3.43 μm, the Optris CT P3 miniaturised pyrometer with programmable electronic box, is specifically designed for the non-contact temperature measurement of thin plastic film  materials (with a thickness of less than 1mm) such as Polyethylene, Polypropylene and Polystyrene in the range 50°C to 400°C.
The sensor has a miniature sensing head which is just 29.5mm diameter x 55mm long and allows the sensor to be installed in applications where space is at a premium. Without cooling, it can be used in environments of up to 75°C, and has protection class IP 65. Its separate electronics enclosure provides a full range of outputs and inputs as standard including Voltage, mA and Thermocouple. It is also possible to incorporate an interface card which provides simple integration into your existing process control equipment. Options include Ethernet, Profibus DP, CAN bus, RS485, RS232 and USB interface and Compact Connect software.
For the temperature measurement of plastic films such as PET, Polyurethane, PTFE, FEP and Polyamide the Optris CT P7 with its specific spectral range of 7.9 μm is most suitable. For thicker materials it is perfectly acceptable to use the Optris CT LT range of sensors. If you require any selection assistance please do not hesitate to ask.
Calibration as well as a full range of accessories are available for the Optris Compact infrared pyrometers.

Features

Special 3.43 μm wavelength for accurate temperature measurement of thin plastic materials such as Polyethylene, Polypropylene and Polystyrene
Robust and usable up to 75°C ambient temperature without cooling
Separate electronics with easy accessible programming keys and LCD backlit display
Selectable analog output: 0/4 – 20mA, 0-5V, 0-10V, thermocouple type K or J
Optional USB, RS485, RS232 interface, relay outputs (2 x optically isolated), CAN-Bus, Profibus DP, Ethernet

General Specifications

Environmental rating:    IP 65 (NEMA-4)
Ambient temperature: Sensing head: 0°C to 75°C Electronics: 0°C to 75°C
Storage temperature: Sensing head:-40°C to 85°C Electronics: -40°C to 85°C
Relative humidity: 10 – 95%, non condensing
Vibration: IEC 68-2-6: 3 G, 11-200 Hz, any axis
Shock: IEC 68-2-27: 50 G, 11 ms, any axis
Weight: Sensing head 200g (with massive housing) Electronics 420g

Measurement Specifications

Temperature range (1): 50°C to 400°C (scaleable via programming keys or software)
Spectral range: 3.43 μm
Optical resolution       (90 % energy): 15:1
System accuracy (2) (at ambient temp                      23 ± 5 °C ): ± 3% or ± 1°C (3)
Repeatability       (at ambient temp 23 ± 5 °C): ± 1.5 °C
Temperature resolution (4): 0.1K
Response time (90% signal): 100ms
Emissivity/Gain: 0.100 – 1.100 (adjustable via programming keys or software)
Transmissivity/Gain: 0.100 – 1.100 (adjustable via programming keys or software)
Signal processing: peak hold, valley hold, average; extended hold function with threshold and hysteresis (adjustable via programming keys or software)
Software: optris Compact Connect

1) TObject>TSensing head+25°C 2) Specification valid at TObject≥ 75°C 3) whichever is greater 4) 125°C TObj 100ms time constant

Electrical Specifications

Output/analogue:  0/4 – 20 mA, 0-5/10V, thermocouple J or K, alarm.
Output/alarm: 24 V/50 mA (open collector)
Optional Alarm Output: relay: 2 x 60 V DC/42 V AC; 0.4 A; optically isolated
Outputs/digital (optional): USB, RS232, RS485, CAN-Bus, Profibus DP, Ethernet
Output impedances: mA max. 500 Ω (with 8-36 V DC) mV min. 100 kΩ load impedance thermocouple 20 Ω
Inputs programmable functional inputs for external emissivity adjustment, ambient temperature compensation, trigger (reset of hold functions)
Cable length: 3m (standard), 8m
Current draw: max. 100mA
Power Supply: 8-36 V DC

Optical Specifications

Dimensions

Accessories

CompactConnect Software

Compact Connect Software