Optris PI 08M Thermal Infrared Camera for laser applications
The spectral range of 800 nm of the newly developed thermal imager optris PI 08M decreases measurement errors resulting from unknown or changing emissivities. Due to the spectral range as well as the continuous measurement range from 575 °C to 1900 °C, the compact infrared camera is ideally suited for almost all NIR and CO2 laser processing applications.
Short Wavelength Optris PI 08M Thermal Imaging Camera
The spectral range of 800 nm of the newly developed thermal imager optris PI 08M decreases measurement errors resulting from unknown or changing emissivities. Due to the spectral range as well as the continuous measurement range from 575 °C to 1900 °C, the compact infrared camera is ideally suited for almost all NIR and CO2 laser processing applications.
The frame rate of 1 kHz, as well as the high optical resolution, enable an optimal adaption to the respective application.
Data SheetFeatures
- Special narrow-band spectral response at 800 nm ideal for almost all NIR and CO2 laser processing applications
- Wide measurement range: 575 °C to 1900 °C without sub-ranges
- High dynamic CMOS detector with up to 764 x 480 pixels resolution
- Up to 1 kHz frame rate for fast processes
- Real-time analog output with 1 ms response time
- Extensive software package and SDK included
- Starting from £ 3330, software and I/O interface inclusive
Technical Information
- Scope of supply:
USB camera incl. 1 lens,
Lens tube with protective window,
USB cable (1 m),
table tripod,
PIF cable incl. terminal block (1 m),
software package optris PIX Connect,
carrying case Alu
optional: CoolingJacket, high temperature cable - Detector: CMOS (15 μm x 15 μm)
- Optical resolution (switchable)/ Frame rate:
764 x 480 pixels @ 32 Hz
382 x 288 pixels @ 80 Hz (swichable to 27 Hz)
72 x 56 pixels @ 1 kHz
764 x 8 pixels @ 1 kHz (fast linescanning mode) - Spectral range: 800 nm
- Temperature ranges:
575 … 1900 °C (27 Hz mode)
625 … 1900 °C (80 Hz and 32 Hz mode)
750 … 1900 °C (1 kHz mode) - Optics:
FOV @ 382 x 288 px:
13° x 10° (f = 25 mm) // FOV @ 764 x 480 px:
26° x 16° (f = 25 mm) - Thermal sensitivity (NETD)1):
< 2 K (1000 °C) for 27 Hz, 32 Hz and 80 Hz
< 3 K (1400 °C) for 1 kHz - Accuracy: ±1 %(<1500 °C)/ ±1.5 % (>1500 °C) of reading
- PC interface: USB 2.0 / optional USB to GigE (PoE) conversion
- High speed analog output (@ 1 kHz mode):
0 – 10 V real-time output of 8×8 pixels (1 ms response time) - Standard Process interface (PIF):
0 – 10 V input, digital input (max. 24 V), 0 – 10 V output - Optional Industrial Process interface (PIF):
2x 0-10 V inputs, digital input (max. 24 V), 3x 0 – 10 V outputs,
3x relay (0 – 30 V/ 400 mA), fail-safe relays - Cable length (USB):
1 m (standard), 5 m, 10 m
5 m and 10 m also available as HT cable (180 °C) - Ambient temperature (TAmb): 5 … 50 °C
- Storage temperature: -40 … 70 °C
- Relative humidity: 20 – 80%, non-condensing
- Enclosure (size/ rating): 46 mm x 56 mm x 90 mm / IP 67 (NEMA 4)2)
- Weight: 320 g, incl. lens
- Shock3): IEC 60068-2-27 (25 g and 50 g)
- Vibration3): IEC 60068-2-6 (sinus-shaped)/ IEC 60068-2-64 (broadband noise)
- Tripod mount: 1/4-20 UNC
- Power supply: USB
1) at 27 Hz, 32 Hz and 80 Hz
2) Only applies when lens protection tube is used
3) For more details see operator‘s manual
Related products
Optris Xi Low Cost Thermal Imaging Cameras
Optris PI Thermal Imaging Cameras
Optris Thermal Imaging Cameras For Glass Applications
Optris PI450 G7 VGA Thermal Imaging Camera for Glass Applications
Optris PI Thermal Imaging Cameras
Optris PI450 / PI400 High Resolution Thermal Imaging Cameras
Optris PI Thermal Imaging Cameras